TRB Gateaways

TRB140 WikiWatch videoTRB140 is an ultra-small, lightweight, and energy-efficient industrial gateway equipped with mission-critical LTE Cat 4 capabilities, Gigabit Ethernet interface, digital Inputs/Outputs, and micro-USB port. Because of its compact design, this product is perfect for projects and applications where a sole gadget requires reliable internet connectivity. TRB140 specially engineered to be used in the industrial sector and has a wide range of software security features, such as SMS control, Firewall, OpenVPN, IPsec, Remote Management System (RMS), and FOTA support. MOBILE Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID. SMS/Call SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities USSD Supports sending and reading Unstructured Supplementary Service Data messages Black/White list Operator black/white list Band management Band lock, Used band status display APN Auto APN Bridge Direct connection (bridge) between mobile ISP and device on LAN Passthrough Gateway assigns its mobile WAN IP address to another device on LAN Multiple PDN Possibility to use different PDNs for multiple network access and services ETHERNET LAN 1 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover NETWORK Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL) Routing Static routing Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection Firewall Port forwards, traffic rules, custom rules DHCP Static and dynamic IP allocation QoS / Smart Queue Management (SQM) (planned) Traffic priority queuing by source/destination, service, protocol or port DDNS Supported >25 service providers, others can be configured manually SSHFS Possibility to mount remote file system via SSH protocol SECURITY Authentication Pre-shared key, digital certificates, X.509 certificates Firewall Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) Mobile quota control Set up custom data limits for SIM card WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter VPN OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC IPsec IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) GRE GRE tunnel PPTP, L2TP Client/Server services can run simultaneously, L2TPv3 support ZeroTier ZeroTier VPN WireGuard WireGuard VPN client and server support MODBUS MODBUS TCP SLAVE ID filtering Respond to one ID in range [1;255] or any Allow remote access Allow access through WAN Custom registers MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality MODBUS TCP MASTER Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII MQTT GATEWAY Gateway Allows sending commands and receiving data from MODBUS Master trough MQTT broker DNP3 Supported modes TCP Master, DNP3 Outstation DATA TO SERVER Protocol HTTP(S), MQTT, Azure MQTT, Kinesis MONITORING & MANAGEMENT WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log FOTA Firmware update from sever, automatic notification SSH SSH (v1, v2) SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET Call Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem MQTT MQTT Broker, MQTT publisher SNMP SNMP (v1, v2, v3), SNMP trap JSON-RPC Management API over HTTP/HTTPS MODBUS MODBUS TCP status/control RMS Teltonika Remote Management System (RMS) IoT PLATFORMS Cloud of Things Allows monitoring of: Device data, Mobile data, Network info, Availability ThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP Azure IoT Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server SYSTEM CHARACTERISTICS CPU ARM Cortex-A7 1.2 GHz CPU RAM 128 MB (50 MB available for userspace) FLASH storage 512 MB (200 MB available for userspace) FIRMWARE / CONFIGURATION WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup FOTA Update FW/configuration from server RMS Update FW/configuration for multiple devices Keep settings Update FW without losing current configuration FIRMWARE CUSTOMIZATION Operating system RutOS (OpenWrt based Linux OS) Supported languages Busybox shell, Lua, C, C++ Development tools SDK package with build environment provided INPUT/OUTPUT Configurable I/O 2 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA (not available in TRB140*2****) Output control HTTP POST/GET, Schedule Events SMS, EMAIL I/O juggler Allows to set certain I/O conditions to initiate event POWER Connector 4 pin industrial DC power socket Input voltage range 9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards Power consumption < 5 W PHYSICAL INTERFACES (PORTS, LEDS, ANNTENAS, BUTTONS, SIM) Ethernet 1 x RJ45 port, 10/100/1000 Mbps I/Os 2 x Configurable I/O pins on 4 pin power connector (I/O not available in TRB140*2****) USB 1 x Virtual network interface via micro USB Status LEDs 3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1x Power LED SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V Power 1 x 4 pin DC connector Anntena 1 x SMA for LTE Reset Reboot/User default reset/Factory reset button PHYSICAL SPECIFICATIONS Casing material Aluminum housing Dimensions (W x H x D) 74.5 x 25 x 64.4 mm Weight 134 g Mounting options Bottom and sideways DIN rail, Flat surface OPERATING ENVIRONMENT Operating temperature -40 °C to 75 °C Operating humidity 10 % to 90 % non-condensing Ingress Protection Rating IP30 REGULATORY & TYPE APPROVALS Regulatory CE/RED, EAC, RoHS, WEEE EMI Standards Draft ETSI EN 301 489-1 V2.2.0, Draft ETSI EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0 ESD EN 61000-4-2:2009 RS EN 61000-4-3:2006 + A1:2008 + A2:2010 EFT EN 61000-4-4:2012 Surge protection EN 61000-4-5:2014 CS EN 61000-4-6:2014 DIP EN 61000-4-11:2004 RF Standards EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-1 V11.1.2, EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2 SAFETY Standards IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2017

TRB141 WikiWatch videoThis small industrial LTE Cat 1 gateway is equipped with a mico USB and various Input/Output options, including Digital, Relay, Analog, and Isolated. Paired with secure and functional RutOS, plenty of processing power, and Teltonika Networks Remote Management System (RMS), this device offers unprecedented application flexibility to manage and control equipment remotely over LTE Cat 1. It has a wide range of software features such as SMS control, VPN, IPsec, Firewall, and FOTA support. Perfect for application scenarios, where devices must be remotely managed using Inputs/Outputs. HARDWARE Mobile : 4G/LTE (Cat 1), 3G, 2G CPU : Qualcomm, ARM Cortex A7, 1.2 GHz Memory : 512 MBytes Flash (70 MBytes for userspace), 128 MBytes RAM (50 MBytes for userspace) Powering option : 4pin power socket, 9-30 VDC SIM 1x Internal SIM holder (2FF) Antenna connectors 1x SMA for mobile Inputs/Outputs On 4pin socket: 2 x Digital input/Digital open collector output (configurable) Intputs/Outputs On 16pin socket: 1 x Isolated input, 1 x Single wire input, 1 x Analog input (with 4-20mA capability), 1x Latching relay output, 1 x Non-latching relay output, 2 x Dry/Wet input (configurable) Other 1x Micro USB slave Status LEDs 3x Connection type, 5x Signal strength, 1x Power Operating temperature -40 °C to 75 °C Housing Aluminium housing with DIN rail mounting option Dimension (W x H x D) 75 x 25 x 65 mm Weight 136 g SOFTWARE Operating system RutOS Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSLv3, TLS 1.3, ARP, PPP, DHCP, Telnet VPN and tunneling OpenVPN, IPsec, GRE, PPTP, L2TP Monitoring and management WEB UI, CLI, SSH, SMS, TR-069, SNMP, JSON-RPC, MQTT, RMS Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection Cloud solutions RMS, FOTA, Telenor, Azure IoT Hub, Cloud of Things, Cumulocity, ThingWorx Services DDNS, VRRP, WEB filter, UPNP, Traffic Logging

TRB142 WikiWatch videoTRB142 comes with a widely used RS232 interface for remote device management. It is equipped with mission-critical LTE Cat 1 capabilities and software based on OpenWRT, hence offering a high degree of customization. Just like the other TRB series products, it provides a wide range of software features such as SMS control, VPN, IPsec, Firewall, and FOTA support. This gateway is durable, offers a wide range of power supply voltages, and is compatible with Teltonika Networks Remote Management System (RMS). HARDWARE Mobile : 4G/LTE (Cat 1), 3G, 2G CPU : Qualcomm, ARM Cortex A7, 1.2 GHz Memory : 512 MBytes Flash (70 MBytes for userspace), 128 MBytes RAM (50 MBytes for userspace) Powering option : 4pin power socket, 9-30 VDC SIM 1x Internal SIM holder (2FF) Antenna connectors 1x SMA for mobile Inputs/Outputs On 4pin socket : 2x Digital input/Digital open collector output (configurable) Serial 1x RS232 Other 1x Micro USB slave Status LEDs 3x Connection type, 5x Signal strength, 1x Power Operating temperature -40° C to 75° C Housing Aluminium housing with DIN rail mounting option Dimension (W x H x D) 75 x 25 x 65 mm Weight 135 g SOFTWARE Operating system RutOS Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSLv3, TLS 1.3, ARP, PPP, DHCP, Telnet Monitoring and management WEB UI, CLI, SSH, SMS, TR-069, SNMP, JSON-RPC, MQTT, RMS Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection Cloud solutions RMS, FOTA, Telenor, Azure IoT Hub, Cloud of Things, Cumulocity, ThingWorx Modbus TCP slave, TCP master, RTU master, RTU gateway, Modbus over MQTT Serial Console, Over IP, Modem, NTRIP, Modbus

TRB145 WikiWatch videoTRB145 is a mission-critical LTE Cat 1 gateway, equipped with RS485 interface. Compact design and easy installation make this gateway perfect for appications, where a sole gadget must be remotely controlled over the RS485 serial interface. Just like the rest of TRB products, TRB145 is engineered to be used in industrial applications. Therefore, it has a wide range of software features, such as SMS control, Firewall, Open VPN, IPsec, Teltonika Networks Remoe management System (RMS), and FOTA support. HARDWARE Mobile : 4G/LTE (Cat 1), 3G, 2G CPU : Qualcomm, ARM Cortex A7, 1.2 GHz Memory : 512 MBytes Flash (70 Mbytes for userspace), 128 MBytes RAM (50 MBytes for userspace) Powering option : 4pin power socket, 9.30 VDC SIM 1x Internal SIM holder (2FF) Antenna connectors 1x SMA for mobile Inputs/Outputs On 4pin socket : 2x Digital input/Digital open collector output (configurable) Serial 1x RS485 Status LEDs 3x Connection type, 5x Signal strength, 1x Power Operating temperature -40° C to 75° C Housing Aluminium housing with DIN rail mounting option Dimension (W x H x D) 75 x 25 x 65 mm Weight 130 g SOFTWARE Operating system RutOS Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSLv3, TLS 1.3, ARP, PPP, DHCP, Telnet Monitoring and management WEB UI, CLI, SSH, SMS, TR-069, SNMP, JSON-RPC, MQTT, RMS Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection Cloud solutions RMS, FOTA, Telenor, Azure IoT Hub, Cloud of Things, Cumulocity, ThingWorx Modbus TCP slave, TCP master, RTU master, RTU gateway, Modbus over MQTT Serial Console, Over IP, Modern, NTRIP, Modbus

TRB245 WikiWatch videoIndusrial LTE Cat 4 gateway packs all essential features for any industry: fast and reliable internet connection, combination of Ethernet and serial communication, secure power connector. I/O ports, and time synchronization services. TRB245 can be used to integrate modern and legacy industrial equipment in one solution via RS232 or RS485 interfaces. A wide range of software features like SMS control, Firewall, OpenVPN, IPsec, RMS ensures that data can be reached securely. Dual SIM functionality with auto-failover and a backup WAN ensure stable connectivity even if the primary connection is lost. HARDWARE Mobile : 4G/LTE (Cat 4), 3G, 2G CPU : Qualcomm, MIPS 24Kc, 650Hz Memory : 16 Mbytes Flash, 64 Mbytes RAM Powering option : 16pin terminal, 9-30 VDC SIM 2x Internal SIM holders (2FF) Antenna connectors 1x SMA for mobile, 1x SMA for GPS Ethernet 1x 10/100 Ethernet port GNSS GPS, GLONASS, BeiDou, Galileo, QZSS Inputs/Outputs On 16pin socket : 3x Digital input/Digital open collector output (configurable), 1x Analog input Serial 1x RS232, 1x RS485 Status LEDs 3x Connection type, 3x Signal strength, 2x Ethernet, 1x Power Operating temperature -40 °C to 75 °C Housing Aluminium housing with DIN rail mounting option Dimension (W x H x D) 83 x 25 x 74 mm Weight 165 g SOFTWARE Operating system RutOS (OpenWrt based Linux OS) Mobile features Multiple PDN, Auto APN, Band lock, SIM switch, Operator black/white list, Data/SMS limits Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, http, HTTPS, FTP, SMTP, SSLv3 Monitoring and management WEB UI, CLI, SSH, SMS, TR-069, SNMP, JSON-RPC, MQTT, RMS Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection Cloud solutions RMS, FOTA, Telenor, Azure IoT Hub, Cloud of Things, Cumulocity, ThingWorx NTP NTP Server, NTP Client, Sync with : External NTP server, GNSS, Mobile operator GNSS NMEA forwarding, AVL, Geofencing Modbus TCP slave, TCP master, RTU master, RTU gateway, Modbus over MQTT Serial Console, Over IP, Modern, NTRIP, Modbus Administration Multi user, Configuration profiles, Diagnostics, logs, Configuration backup

TRB255 Wiki Watch videoTRB255 can be used to integrate modern and legacy industrial equipment into one solution via RS232, RS485 & Ethernet interface. This industrial LTE Cat M1 & NB-IoT gateway is backward compatible to EGPRS (2G) networks. It can still be used with 2G network, however in case it gets shut down, there is a possibility to switch to LPWAN connectivity options. TRB255 has a wide range of industrial and networking features such as Modbus, SMS control, Firewall, OpenVPN and more. This product is compatible with the Teltonika Networks Remote Management System (RMS).MOBILEMobile module LTE (Cat M1) / NB-IoT / EGPRSSIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, on roaming, no network, network denied, data connection failStatus Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.SMS/Call SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilitiesUSSD Supports sending and reading Unstructured Supplementary Service Data messagesBlack/White list Operator black/white listBand management Used band status display, Band lockAPN Auto APNBridge Direct connection (bridge) between mobile ISP and device on LANMultiple PDN Possibility to use different PDNs for multiple network access and servicesETHERNETLAN 1 x LAN port 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover (Configurable to work as WAN port)NETWORKRouting Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) (planned)Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, PPP, SSH, DHCP, Telnet, MQTT, Wake On Lan (WOL)VoIP passthrough support (planned) H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewall Port forward, traffic rules, custom rulesDHCP Static and dynamic IP allocation, DHCP RelayQoS / Smart Queue Management (SQM) (planned) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNS Supported >25 service providers, others can be configured manuallySSHFS Possibility to mount remote file system via SSH protocolSECURITYAuthentication Pre-shared key, digital certificates, X.509 certificatesFirewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-TAttack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)VLAN (planned) Tag based VLAN separationMobile quota control Custom data limits for both SIM cardsWEB filter (planned) Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites onlyAccess control Flexible access control of TCP, UDP, ICMP packets, MAC address filterVPNOpenVPN Multiple clients and server can be running simultaneously, 12 encryption methodsOpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBCIPSec IKEv1, IKEv2, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)GRE GRE tunnelStunnel (planned) Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s codePPTP, L2TP Client/Server services can run simultaneously, L2TPv3 supportDMVPN (planned) Method of building scalable IPsec VPNsSSTP (planned) SSTP client instance supportZeroTier ZeroTier VPN client supportWireGuard WireGuard VPN client and server supportSERIAL COMMMUNICATION MODESModes Console, OverIP, Modem (Full or Partial control), MODBUS RTU master, MODBUS gateway, NTRIP client (planned)MODBUS TCP SLAVEID filtering Respond to one ID in range [1;255] or anyAllow remote access Allow access through WANCustom registers MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionalityMODBUS TCP MASTERSupported functions 01, 02, 03, 04, 05, 06, 15, 16Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCIIMODBUS RTU MASTERSupported baud rates From 300 to 3000000Supported functions 01, 02, 03, 04, 05, 06, 15, 16Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCIINumber of data bits 7 or 8Number of stop bits 1 or 2Parity bits None, Even, OddFlow control None, RTS/CTS (only for RS232 interface), Xon/XoffMQTT GATEWAYGateway Allows sending commands and receiving data from MODBUS Master trough MQTT brokerDNP3Supported modes TCP Master, DNP3 Outstation, RTU MasterDATA TO SERVERProtocols HTTP(S), MQTT, Azure MQTT, KinesisMONITORING & MANAGEMENTWEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel logFOTA Firmware update from server, automatic notificationSSH SSH (v1, v2)SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GETTR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystemMQTT MQTT Broker, MQTT publisherSNMP SNMP (v1, v2, v3), SNMP TrapJSON-RPC Management API over HTTP/HTTPSMODBUS MODBUS TCP status/controlRMS Teltonika Remote Management Systems (RMS)IoT PLATFORMSCloud of Things Allows monitoring of: Device data, Mobile data, Network info, AvailabilityThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network TypeCumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IPAzure IoT Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub serverSYSTEM CHARACTERISTICSCPU Qualcomm QCA9531, MIPS 24kc, 650 MHzRAM 64 MB, DDR2Flash storage 16MB SPI Flash (4 MB available for user)FIRMWARE / CONFIGURATIONWEB UI Update FW from file, check FW on server, configuration profiles, configuration backupFOTA Update FW/configuration from serverRMS Update FW/configuration for multiple devicesKeep settings Update FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating system RutOS (OpenWrt based Linux OS)Supported languages Busybox shell, Lua, C, C++Development tools SDK package with build environment providedLOCATION TRACKINGGNSS GPS, GLONASS, BeiDou, Galileo and QZSSCoordinates GNSS coordinates via WebUI, SMS, TAVL, RMSNMEA NMEA 0183NTRIP (planned) NTRIP protocol (Networked Transport of RTCM via Internet Protocol)Server software Supported server software TAVL, RMSGeofencing Configurable multiple geofence zonesINPUT/OUTPUTConfigurable I/O 3 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mAAnalog input 1 x Analog input (0 - 30 V)Output control HTTP POST/GET, ScheduleEvents SMS, EmailI/O juggler Allows to set certain I/O conditions to initiate eventSERIALRS232 Terminal block connector: TX, RX, RTS, CTSRS485 Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface)Supported baud rates From 300 to 3000000Number of data bits 7 or 8Number of stop bits 1 or 2Parity None, Even, OddFlow control None, RTS/CTS (only for RS232 interface), Xon/XoffPOWERConnector 2 pins in 16 pin industrial terminal blockInput voltage range 9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs maxPower consumption Idle: <1.2 W, Max: <5 WPHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTON, SIM)Ethernet 1 x RJ45 port, 10/100 MbpsI/O’s 3 x Configurable I/O, 1 x Analog input in 16 pin terminal blockStatus LEDs 3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LEDSIM 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM trayPower 2 pins in 16 pin terminal blockAntennas 1 x SMA connector for Mobile, 1 x SMA connector for GNSSRS232 4 pins in 16 pin terminal block (TX, RX, RTS, CTS)RS485 4 pins in 16 pin terminal block (D+, D-, R+, R-)Reset Reboot/User default reset/Factory reset buttonPHYSICAL SPECIFICATIONCasing material Aluminium housing with DIN rail mounting optionDimensions (W x H x D) 83 x 25 x 74.2 mmWeight 165 gMounting options DIN rail, wall mounting (additional kits needed), flat surface placementOPERATING ENVIRONMENTOperating temperature -40 ℃ to 75 ℃Operating humidity 10% to 90% non-condensing